Fits Standard Weld Nipple Black Nipple

• Overview

  This is an external thread type pipe joint that requires a tapered male thread (nominal: R or PT).

• Main usage examples

  For indoor fire hydrant piping, sprinkler indoor sprinkling equipment piping and foam digestion piping, general gas piping, for general air piping or general air conditioning piping for distributing air under pressure from compressors, etc. For piping for flowing fluids of various mechanical equipment, or for structural pipes for the purpose of protecting structural parts, wiring, etc., and for structural members such as handrails and fences.

• Recommended working pressure

  • Airtightness: 0.5MPa (about 5kgf / cm2) air pressure or less
  • Withstand pressure: 2.5MPa (about 25kgf / cm2) water pressure or less

• Type, symbol, chemical composition

  Type	Symbol	Chemical composition(%)
  		P	S
  Carbon steel pipe for piping	SGP	0.040 or less	0.040 or less

• Features of taper screw for pipe (JIS B0203)

  Applicable to threads whose main purpose is the tightness of threads when joining pipes, pipe components, fluid equipment, etc. The screw shape is an eight figure with an angle of about 3.6 ° from the tip of the screw to the end of the screw. The tip of the screw is the thinnest and the end of the screw is the thickest. Therefore, as the screw is tightened, the thread gradually crosses the thread on the other side, and when the torque is applied at the end, the threads are engaged with each other, filling the gap and sealing the inside and outside of the tube. Secure. Unlike a straight screw, once it is tightened with torque, the thread will be worn when it is next loosened. It is not suitable for use in places where it is tightened many times.

• About inspection of screw

  All screw inspections are performed using a taper thread gauge specified in the standard number (JIS B0253) defined by the Japanese Industrial Standards (JIS standard). (Incidentally, the inspection gauge manufacturer we use is made by OSG.)